Car-Rep

 

Specialists in car products

Car-Rep® makes it easy to restore, repair and tune your car. Whether you're treating your car's interior or exterior, we have products to meet your needs. Car-Rep® offers a full range of quality products for DIY car enthusiasts and Car-Rep® professionals.

Styling

Limit search

  • Spraypaint Car-Rep Engine Green 400ml

    Spraypaint Car-Rep Engine Green 400ml

    Car-Rep® Engine Spray is durable acrylic paint for engine blocks, transmission parts etc. Contains compounds for maximum heat dissipation and gloss retention. Produces a superior finish that will not blister, flake, crack or peel. Resists temperatures up to 110 °C. Can be applied wet-on-wet or wet-on-dry. Spray several thin layers.

    Read more
  • Spraypaint Car-Rep Engine Red 400ml

    Spraypaint Car-Rep Engine Red 400ml

    Car-Rep® Engine Spray is durable acrylic paint for engine blocks, transmission parts etc. Contains compounds for maximum heat dissipation and gloss retention. Produces a superior finish that will not blister, flake, crack or peel. Resists temperatures up to 110 °C. Can be applied wet-on-wet or wet-on-dry. Spray several thin layers.

    Read more
  • Spraypaint Car-Rep Engine Silver 400ml

    Spraypaint Car-Rep Engine Silver 400ml

    Car-Rep® Engine Spray is durable acrylic paint for engine blocks, transmission parts etc. Contains compounds for maximum heat dissipation and gloss retention. Produces a superior finish that will not blister, flake, crack or peel. Resists temperatures up to 110 °C. Can be applied wet-on-wet or wet-on-dry. Spray several thin layers.

    Read more
  • Spraypaint Car-Rep Gold Effect 400ml

    Spraypaint Car-Rep Gold Effect 400ml

    Car-Rep Effect spray is a high-gloss decorative acryl paint for indoor use. Leaves shiny decorative surface, dries fast, and covers well. For metal, wood, glass and most artificial surfaces. Limited wear and weather resistance. We recommend Clear Coat Effect spray on dry surface for better resistance. Coverage around 1-2 m². Drying time (at 20°C, 50% relative air humidity): Dust-dry: after approx. 30 minutes, Dry to touch: after approx. 2 hours, Completely dry: after 48 hours Instructions: Clean the surface of oils, grease, dirt, wax and loose rust. Shake the spray can well before use. Spray a small test patch on an invisible area. Spray several thin layers from a distance of 15 cm. Two paint layers are needed for adequate film thickness. Let the surface dry about 5 min. between each layer. Clean the nozzle by spraying the can upside down until only propellant comes out. Wipe off any excess paint from nozzle if necessary.

    Read more
  • Spraypaint Car-Rep Heatresistant Black 400C 400ml

    Spraypaint Car-Rep Heatresistant Black 400C 400ml

    CAR-REP air-drying Heat resistant spray is an easy-to-use aerosol paint with a heat-resistance of up to +400°C. Examples of use: external surfaces of fire places, boilers, chimneys and grills and vehicle exhausts where the surface temperature does not exceed +400 °C. Do not forget to cover nearby surfaces during painting! After application let the surface dry at +20 °C for 15 minutes.

    Read more
  • Spraypaint Car-Rep Heatresistant Black 600C 400ml

    Spraypaint Car-Rep Heatresistant Black 600C 400ml

    CAR-REP heat resistant spray is an easy-to-use aerosol paint with a heat-resistance of up to +600°C. Examples of use: external surfaces of fire places, boilers, chimneys and grills and vehicle exhausts where the surface temperature does not exceed +600 °C. Attention: after application let the surface dry for 30 minutes. The surface reaches the final hardness when heated up-to +200 °C.

    Read more
  • Spraypaint Car-Rep Heatresistant Red 250C 400ml

    Spraypaint Car-Rep Heatresistant Red 250C 400ml

    CAR-REP heat resistant spray is an easy-to-use aerosol paint with a heat-resistance of up to +600°C. Examples of use: external surfaces of fire places, boilers, chimneys and grills and vehicle exhausts where the surface temperature does not exceed +600 °C. Attention: after application let the surface dry for 30 minutes. The surface reaches the final hardness when heated up-to +200 °C.

    Read more
  • Spraypaint Car-Rep Heatresistant Silver 600C 400ml

    Spraypaint Car-Rep Heatresistant Silver 600C 400ml

    CAR-REP heat resistant spray is an easy-to-use aerosol paint with a heat-resistance of up to +600°C. Examples of use: external surfaces of fire places, boilers, chimneys and grills and vehicle exhausts where the surface temperature does not exceed +600 °C. Attention: after application let the surface dry for 30 minutes. The surface reaches the final hardness when heated up-to +200 °C.

    Read more
  • Spraypaint Car-Rep Heatresistant White 600C 400ml

    Spraypaint Car-Rep Heatresistant White 600C 400ml

    Car-Rep Heat resistant spray is an easy-to-use aerosol paint with a heat-resistance of up to +600°C. Examples of use: external surfaces of fire places, boilers, chimneys and grills and vehicle exhausts where the surface temperature does not exceed +600 °C. After application let the surface dry at +20 °C for 30 minutes. Painted surface achieves its final properties after 60 minutes of heating at +200 °C. When several layers of paint are used the surface should be also heated in between applications.

    Read more
  • Spraypaint Car-Rep Wrinkle Black 400ml

    Spraypaint Car-Rep Wrinkle Black 400ml

    Car-Rep® Wrinkle creates a deep and rich texture and is ideal for adding a touch of personal styling to almost any metal surface. Made of genuine acrylic binders and high quality color pastes. Extremely high coverage. The coating is very hard and gives an excellent protection. Resist also color fading, grease, degreasers, rust chipping and tracking. Temperature resistant to 120°C. Examples of use: valve covers, metal dashboards, starters, door panels, shifters, alternators, firewalls. Plastic surfaces must first be primed with Car-Rep® plastic primer. Instructions for use: The longer spraying distance, the more wrinkle effect. Start spraying around 40cm from object and move closer if necessary. Spray thin layers and let dry for about 5 minutes before spraying a new layer. Too thick and wet paint layers will cause limited wrinkle effect. INSTRUCTIONS FOR USE Spray first a thin layer from a distance of around 25 cm and let dry for around one minute. Then spray a wet layer to get enough adhesion to the surface. After painting the adhesive layer you can adjust the roughness of the structure simply by varying the spraying distance the further you spray (max. 60cm), the rougher the surface gets, the closer you spray (min. 20cm), the smoother the structure will be. Let always the previous layer dry around one to several minutes before it is touch-dry before applying next layer. The temperature and the spraying distance impact heavily on drying time. By spraying several layers from distance you can build more structure. ATTENTION! If you want to build structure from a distance please note that the spray mist gets much drier. Continue spraying as instructed even if the structure you build will be quite dry and look uneven. When you are completed and satisfied with the structure, spray a final, wet layer to cover the surface, otherwise the scratch resistance of the surface will be limited.

    Read more